Parkervision WR1500 User Manual download pdf (Page 34)

WR1500 4-Port Wireless DSL/Cable Router

4.6 Conﬁ guring Time Setting

To change your WR1500’s time and date, click

ADVANCED

SYSTEM

and then the

Time Setting

tab. The screen appears as shown. Use this screen to conﬁ gure the router time based on your

local time zone.

LABEL

DESCRIPTION

Time Protocol

Select the time service protocol that your time server sends when you turn on the router. Not all time servers

support all protocols, so you may have to check with your ISP/network administrator or use trial and error to ﬁ nd a

protocol that works.

The main difference between them is the format.

Daytime (RFC 867)

format is day/month/year/time zone of the

server.

Time (RFC 868)

format displays a 4-byte integer giving the total number of seconds since 1970/1/1 at 0:0:0.

The default,

NTP (RFC 1305),

is similar to Time (RFC 868). Select

None

to enter the time and date manually.

Time Server

Address

Enter the IP address or the URL of your time server. Check with your ISP/network administrator if you are unsure

of this information (the default is tick.stdtime.gov.tw).

Current Time (hh:

mm:ss)

This ﬁ eld displays the time of your WR1500. Each time you reload this page, the WR1500 synchronizes the

time with the time server.

New Time (hh:

mm:ss)

This ﬁ eld displays the last updated time from the time server. When you select

None

in the

Time Protocol

ﬁ eld, enter the new time in this ﬁ eld and then click

Apply.

Current Date

(yyyy/mm/dd)

This ﬁ eld displays the date of your WR1500 Router. Each time you reload this page, the WR1500 Router

synchronizes the time with the time server.

New Date (yyyy/

mm/dd)

This ﬁ eld displays the last updated date from the time server. When you select

None

in the

Time Protocol

ﬁ eld, enter the new date in this ﬁ eld and then click

Apply.

Time Zone

Choose the time zone of your location. This will set the time difference between your time zone and Greenwich

Mean Time (GMT).

Daylight Savings

Select this option if you use daylight savings time. Daylight saving is a period from late spring to early fall

when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the

evening.

Start Date (mm-dd)

Enter the month and day that your daylight-savings time starts on if you selected

Daylight Savings.

End Date (mm-dd)

Enter the month and day that your daylight-savings time ends on if you selected

Daylight Savings.

Apply

Click

Apply

to save your changes back to the WR1500 Router.

Reset

Click

Reset

to reload the previous conﬁ guration for this screen.

SYSTEM

Time Setting

General

DDNS

Password

Time Protocol

Time Server Address

Current Time (hh:mm:ss)

: :

New Time (hh:mm:ss)

Current Date (yyyy/mm/dd)

New Date (yyyy/mm/dd)

/ /

2000

/ /

2000

Time Zone

(GMT) Greenwich Mean Time: Dublin, Edinburgh, Libson, London

Daylight Savings

Start Date (mm-dd)

(Month)

(Day)

0 0

(Month)

(Day)

0 0

End Date (mm-dd)

Apply Reset

None

192.43.244.18

The table below

describes the labels in

this screen.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 176 177

Comments to this Manuals

No comments

Parkervision WR1500 User Manual Page 34

Comments to this Manuals