Parkervision WR1500 User Manual download pdf (Page 75)

WR1500 4-Port Wireless DSL/Cable Router

9.4 Conﬁ guring Address Mapping

Ordering your rules is important because the WR1500 Wireless Router applies the rules in the

order that you specify. When a rule matches the current packet, the WR1500 Wireless Router

takes the corresponding action and the remaining rules are ignored. If there are any empty rules

before your new conﬁ gured rule, your conﬁ gured rule will be pushed up by that number of empty

rules. For example, if you have already conﬁ gured rules 1 to 6 in your current set and now you

conﬁ gure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if

you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5,6 and 7 become new

rules 4, 5 and 6.

To change your WR1500 Wireless Router’s address mapping settings, click

ADVANCED, SUA/

NAT

and then the

Address Mapping tab

. The screen appears as shown.

The table below describes the setting in the above screen.

LABEL

DESCRIPTION

This ﬁ eld displays the index number of the address mapping rule.

Local Start IP

This refers to the Inside Local Address (ILA), that is the starting local IP address. Local IP

addresses are N/A for

Server

port mapping.

Local End IP

This is the end local IP address. If the rule is for all local IP addresses, then this ﬁ eld

displays 0.0.0.0 and 255.255.255.255 as the

Local End IP

address. This ﬁ eld is

N/A

for

One-to-One

and

Server

mapping types.

Global Start IP

This refers to the global IP address. 0.0.0.0 is for a dynamic IP address from your ISP

with

Many-to-One

and

Server

mapping types.

Global End IP

This is the ending Inside Global Address (IGA), that is the starting global IP address.

This ﬁ eld is

N/A

for

One-to-One, Many-to-One

and

Server

mapping types.

Type

Choose the port mapping type from the drop down list.

Insert

Click

Insert

to insert a new mapping rule before an existing one.

Edit

Click

Edit to go to

the

Address Mapping Rule

screen.

Delete

Click

Delete

to delete an address mapping rule.

Address Mapping

Insert Edit Delete

SUA/NAT

SUA Server

Local Start IP

Local End IP Global Start IP

Global End IP

Type

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 176 177

Comments to this Manuals

No comments

Parkervision WR1500 User Manual Page 75

Comments to this Manuals