WR1500 4-Port Wireless DSL/Cable Router
®
78
9.4.1 Confi guring Address Mapping Rule
To edit an address mapping rule, click the
button to display the screen shown next.
The following table describes the labels in this screen.
Choose the port mapping type from the drop down list.
Choose the port mapping type from the drop down list.
Choose the port mapping type from the drop down list.
This is the starting local IP address (ILA). Local IP addresses are N/A for
This is the starting local IP address (ILA). Local IP addresses are N/A for
This is the end local IP address (ILA). If your rule is for all local IP addresses, then
This is the end local IP address (ILA). If your rule is for all local IP addresses, then
address and 255.255.255.255 as the
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic IP
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic IP
This is the ending global IP address (IGA). This fi eld is
This is the ending global IP address (IGA). This fi eld is
to save your changes back to the WR1500 Wireless Router.
to exit this screen without saving.
Apply Cancel
Address Mapping Rule
SUA/NAT - Address Mapping
Type
One-to-One
Local Start IP
0.0.0.0
0.0.0.0
Local End IP
N/A
Global Start IP
Global End IP
N/A
Comments to this Manuals