Parkervision WR1500 User Manual Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
WR1500 4-Port Wireless DSL/Cable Router
®
132
16.5 F/W Upload Screen
Occasionally, we will make an updated version of fi rmware available for download. To check
and see if a newer version of fi rmware is available for your WR1500, go to the following page
on our web site: www.parkervision.com/downloads.htm Under the section for the WR1500 on
that page, you will see a link for a fi rmware update for the WR1500 (if available). The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot. See the Firmware and Confi guration File
Maintenance chapter for upgrading fi rmware using FTP/TFTP commands.
Click
MAINTENANCE
, and then the
FAV UPLOAD tab
. Follow the instructions in this screen
to upload fi rmware to your WR1500 Wireless Router.
The following table describes the labels in this screen.
Firmware Upload
Firmware
Firmware Upload
Firmware
Firmware Upload
LABEL
DESCRIPTION
DESCRIPTION
File Path
Type in the location of the le you want to upload in this fi eld or click
Browse
... to nd it.
Browse...
Click
Click
Browse...
to fi nd the .bin le you want to upload. Remember that you must decompress
to fi nd the .bin le you want to upload. Remember that you must decompress
compressed (.zip) fi les before you can upload them.
Upload
Click
Click
Upload
to begin the upload process. This process may take up to two minutes.
Do not turn off the device while fi rmware upload is in progress!
After you see the Firmware Upload in Process screen, (see next page for this screen)
wait two minutes before logging into the device again.
Continued on next page
Continued on next page
FIRMWARE UPLOAD
To upgrade the internal router firmware, browse to the
location of the binary (.BIN) upgrade file and click Upload.
Upgrade files can be downloaded from website. If the upgrade
file is compressed (.ZIP file), you must first extract the binary
(.BIN) file. In some cases, you may need to reconfigure the
router after upgrading.
File Path:
Refresh
Browse
Page view 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 176 177

Comments to this Manuals

No comments