search

Parkervision WR1500 User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 78
WR1500 4-Port Wireless DSL/Cable Router
®
81
10.2.1 Confi guring Route Entry
Select a static route index number and click
Edit
. The screen shown next appears. Fill in the
required information for each static route.
The following table describes the labels in this screen.
Edit IP Static Route
LABEL
DESCRIPTION
DESCRIPTION
Route Name
Enter a descriptive name for this route. This is for identifi cation purposes only.
Enter a descriptive name for this route. This is for identifi cation purposes only.
Active
Select this check box to activate this static route.
Select this check box to activate this static route.
Destination IP
Address
Type the IP network address of the fi nal destination. Routing is always based on network
Type the IP network address of the fi nal destination. Routing is always based on network
number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in
the subnet mask fi eld to force the network number to be identical to the host ID.
IP Subnet Mask
IP Subnet Mask
Type the IP subnet mask here.
Gateway IP
Gateway IP
Address
Type the IP address of the gateway. The gateway is an immediate neighbor of your WR1500
Type the IP address of the gateway. The gateway is an immediate neighbor of your WR1500
Wireless Router that will forward the packet to the destination. On the LAN, the gateway must be
a router on the same segment as your WR1500 Wireless Router; over the WAN, the gateway
must be the IP address of one of the remote nodes.
Metric
Type a number that approximates the cost for this link. Metric represents the “cost” of
Type a number that approximates the cost for this link. Metric represents the “cost” of
transmission for routing purposes. IP routing uses hop count as the measurement of cost, with
a minimum of 1 for directly connected networks. The number need not be precise, but it must be
between 1 and 15. In practice, 2 or 3 is usually a good number.
Private
This parameter determines if the WR1500 Wireless Router will include the route to this remote
This parameter determines if the WR1500 Wireless Router will include the route to this remote
node in its RIP broadcasts. If this check box is selected, this route is kept private and not included
in RIP broadcast. If it is not selected, the route to this remote node will be propagated to other
hosts through RIP broadcasts.
Apply
Apply
Click
Click
Apply
to save your changes back to the WR1500 Wireless Router.
Cancel
Cancel
Cancel
Cancel
Click
Click
Cancel
Cancel
to exit this screen without saving.
Apply Cancel
STATIC ROUTE - EDIT
Route Name
Active
Destination IP Address
IP Subnet Mask
Gateway IP Address
Metric
Private
0.0.0.0
0.0.0.0
0.0.0.0
2
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 176 177

Comments to this Manuals

No comments
  • IPSO MosquitoBite Planes Master View MIG-TIG-STICK A2B Electronics
  • Pinnacle Speakers Subwoofers NEC Telephones Compaq Computer case parts Rolls AV receivers Bolsey Unknown
  • Mantis 7940 Asus T100TA Varimixer W60P Bosch BKS4003 RCA M4008
  • Clarion DPX2250 User Manual Campbell Hausfeld DH580000AV Instruction Manual Samsung HT-C5500 User Manual Electrolux ESL2400RO User Manual Sony DAV-DZ585K User Manual