Parkervision WR1500 User Manual download pdf (Page 152)

WR1500 4-Port Wireless DSL/Cable Router

154

19.4 Wireless LAN Setup - Continued

FIELD

DESCRIPTION

EXAMPLE

ESSID

The ESSID (Extended Service Set IDentity) identiﬁ es the AP the wireless

station is to associate to. Wireless stations associating to the AP must have

the same ESSID. Enter a descriptive name up to 32 printable 7-bit ASCII

characters.

Wireless

Hide ESSID

Press [SPACE BAR] and select

Yes

to hide the ESSID in the outgoing data

frame so a intruder cannot obtain the ESSID through passive scanning.

Channel ID

Press [SPACE BAR] to select a channel. This allows you to set the

operating frequency/channel depending on your particular region.

CH01

2412MHz

RTS

Threshold

Setting this attribute to zero turns on the RTS/CTS handshake. Enter a

value between 0 and 2432.

2432

Fragment

Threshold

This is the maximum data fragment size that can be sent. Enter a value

between 256 and 2432.

2432

WEP

Select

Disable

to allow wireless stations to communicate with the Wireless

Routers without any data encryption. Select

64-bit WEP

128-bit WEP

to enable data encryption.

Disable

Default Key

Enter the key number (1 to 4) in this ﬁ eld. Only one key can be enabled at

any one time. This key must be the same on the WR1500 Wireless Router

and the wireless stations to communicate.

Key 1 to

Key 4

The WEP keys are used to encrypt data. Both the WR1500 Wireless

Router and the wireless stations must use the same WEP key for data

transmission.

If you chose

64-bit WEP

in the

WEP Encryption

ﬁ eld, then enter any 5

ASCII characters or 10 hexadecimal characters (“0-9”, “A-F”). If you chose

128-bit WEP

in the

WEP Encryption

ﬁ eld, then enter 13 ASCII characters

or 26 hexadecimal characters (“0-9”, “A-F”).

0x12345abcde

Enter “Ox” before the key to denote a hexadecimal

key. Don’t enter “Ox” before the key to denote a ASCII

key.

Authen.

Method

Press [SPACE BAR] to select

Auto, Open System Only

Shared Key

Only

and press [ENTER].

This ﬁ eld is

N/A

if WEP is not activated. If WEP encryption is activated,

the default setting is

Auto.

Auto

Block Intra-

BSS Trafﬁ c

Press [SPACE BAR] to select

Yes

and press [ENTER].

Number of

Associated

Stations

Enter the maximum number of wireless stations that may connect to the

WR1500 Wireless Router. The number should be from 1 to 8.

Breathing

LED

Press [SPACE BAR] to select

Yes

and press [ENTER].

Yes

Output

Power

Press [SPACE BAR] to select

11 dBm, 13dBm, 15dBm

17dBm

and

press [ENTER].

17dBm

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to conﬁ rm or

ESC to cancel” to save your conﬁ guration or press [ESC] to cancel and go back to the previous screen.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 176 177

Comments to this Manuals

No comments

Parkervision WR1500 User Manual Page 152

Comments to this Manuals