Parkervision USB1500 User Manual download pdf (Page 23)

2525

USB1500 Wireless PC LAN Adapter

This chapter covers potential problems and the possible remedies. After each problem

description, some instructions are provided to help you diagnose and solve the problem.

5.1 Problems During Driver Installation

PROBLEM CORRECTIVE ACTION

The ParkerVision Wireless

USB LAN Adapter is not

working after the driver

installation

Make sure the driver software is installed BEFORE you connect your wireless USB LAN

adapter to your computer. Failure to install the software ﬁ rst may result in the LAN adapter

being recognized incorrectly.

Reonnect the USB adapter to your computer’s port again. The Power and Link LED should

be on if the adapter is properly inserted.

Make sure there is no hardware conﬂ ict between your ParkerVision Wireless LAN Adapter

and other hardware in your computer. If there is a conﬂ ict, you need to set your I/O and

IRQ manually.

Windows does not auto-

detect the ParkerVision

Wireless USB LAN Adapter

Restart your computer.

Do a manual scan of your computer hardware.

In Windows 2000, click Start, Settings, Control Panel, System, Hardware, Hardware

Wizard.

In Windows XP, click Start, Control Panel, Performance and Maintenance, System,

Hardware, Device Manager. Then Right-click on your computer name and select Scan

for Hardware Changes.

Check your USB port and make sure there is no hardware conﬂ ict.

Try an alternate USB port if one is available on your computer.

Contact ParkerVision Customer Support

Chapter 5 :

Troubleshooting

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

No comments

Parkervision USB1500 User Manual Page 23